Bellevue, WA Steel Building Accessories: Design Your Building Your Way

Commercial Industries supplies and installs only NAIMA certified and UL rated fiberglass blanket insulation. Our standard facing is heavy duty reinforced vinyl (VRP), the best in the industry. It has a superior .02 moisture perm rating and the best tear resistance available. The insulation facing side seams have double seal tabs to complete the vapor barrier. Commercial Industries then installs white PVC retaining strips to help hold the insulation in place as well as providing a clean-looking trim at all side seams. While we do have other facings available, we have found the small additional cost of the heavy duty VRP facing in most applications is well worth the investment. The insulation is available in the following values.

Commercial Industries walk-in doors are 3070 commercial grade and come with a baked on factory applied primer coat finish. Door leafs are insulated and made of heavy 18 gauge galvanized steel. Door frames are made of heavy 16 gauge galvanized steel. Sixteen gauge sub-frames are installed in the metal building wall system to add support for the walk-in door package. The doors come factory pre-assembled for better fit and finish with commercial lever lockset, stainless steel ball-bearing hinges, heavy duty closer, and threshold and weather stripping. Available options are insulated door windows, dead bolt lock, panic hardware, and baked on factory finish paint.

Commercial Industries windows are commercial grade insulated glass available in anodized aluminum or vinyl frames with nailable flanges. Standard and custom sizes are available with fixed glass or operable vent. Available options are solar tinting, low “E” glazing, thermal break, wire glass, and tempered glass.

Commercial Industries provides commercial grade insulated aluminum frame storefront glass systems to fit any application. They are available with single walk doors, double walk doors, and sliding doors in standard commercial grade and heavy duty for high usage applications in several standard anodized colors.

Commercial Industries provides plastic panels for light transmission. These plastic panels are heavy 8 ounce design in opaque white color and can be installed in either the roof or the wall areas.

Commercial Industries skylights are of commercial grade Tri-Arch dome design available in clear, opaque white and smoked plastic. The skylights can be ordered with insulated double dome and heavy 14 or 16 gauge insulated roof curb. Standard sizes are 2′ X 2′, 4′ X 4′, and 4′ X 8′. They are also available as an opening dome and can have a UL rated fusible link to serve as a smoke hatch.

Commercial Industries uses Wayne Dalton commercial sectional overhead doors for their superior product quality and service.

Sectional overhead doors are installed using the following:

• Standard or insulated panel sections with full perimeter weather seals to cut down on weather infiltration and wind noise
• High-lift two- and three-inch break away track to keep the door from hitting the header and getting the door up and out of the way giving you the maximum interior clearance
• Heavy duty hardware for maximum service life with minimum maintenance and factory prime paint finish

Doors are available with manual lift hardware for smaller doors, chain hoist operators for larger doors, and power operators with auxiliary chain hoist operators for the optimum in convenience and a reduction in maintenance. Trimmed framed openings for the overhead doors are heavy 14 gauge steel for correct alignment. Extra heavy 10 gauge steel framed openings are available for situations where extra durability and support are required.

When there are tight headroom situations or an extra wide door is required, Commercial Industries provides the superior quality of R & S steel roll-up doors. Roll-up doors are installed with full perimeter weather seals to cut down on weather infiltration and wind noise and heavy duty hardware for maximum service life with minimum maintenance and factory prime paint finish. Doors are available with chain hoist operators or power operators with auxiliary chain hoist for the optimum in convenience and a reduction in maintenance. Trimmed framed openings for the overhead doors are heavy 14 gauge steel for correct alignment. Extra heavy 10 gauge steel framed openings are available for situations where extra durability and support are required.

For extra-large door and hanger door applications, Commercial Industries provides heavy duty sliding doors.

Sliding doors are installed with the following:

• Full perimeter weather seals to cut down on weather infiltration and wind noise
• Heavy duty hardware for maximum service life with minimum maintenance
• Overhead support rollers and bottom guides for smaller doors
• Overhead guide rollers and bottom support rail systems for larger doors

Sliding doors are insulated, sheeted, and trimmed to match the CBC Steel Building wall system. Doors are available with manual operation or power operators for the optimum in convenience and a reduction in maintenance. Trimmed framed openings for the overhead doors are heavy 14 gauge steel for correct alignment. Extra heavy 10 gauge steel framed openings are available for situations where extra durability and support are required.

For hanger door applications, Commercial Industries provides heavy duty Wilson Bi-Fold Doors. Wilson is the leader in the industry for providing the highest quality bi-fold doors. Their aluminum frame creates a very strong and rigid system that is much lighter than the other steel frame systems on the market. Their hardware is designed for many years of trouble-free use with a minimum of maintenance.

Full perimeter weather seals are used to cut down on weather infiltration and wind noise. Bi-fold doors are insulated, sheeted, and trimmed to match the CBC Steel Building wall system. Doors are available with power operators for the optimum in convenience and a reduction in maintenance. Trimmed framed openings for the overhead doors are heavy 14 gauge steel for correct alignment. Extra heavy 10 gauge steel framed openings are available for situations where extra durability and support are required.

Commercial Industries has a variety of products for ventilation purposes. From turbo-gravity ridge mount roof vents to wall louvers to power operated roof exhausters, Commercial Industries works with R & S Sales, a long time manufacturer and supplier of ventilation specific products, to create a ventilation system for your specific needs. Products and materials used are the highest quality in the industry. Roof penetrations are sub-framed for correct support and flashed for complete weather tight security.

Mezzanine systems may be designed into your CBC Steel building for a variety of applications. Office loading, light storage, and heavy storage can all be accommodated using CBC structural framing components with long span beams and steel bar joists to minimize interior columns. Floor surfaces can be steel decking with a concrete topping slab or T & G plywood. Steel stair systems and steel railings are custom built locally to ensure accuracy, quality, and to meet all codes. All mezzanine and stair systems are installed by Commercial Industries qualified field crews for a quality crafted professional installation.

CBC Steel Buildings can be designed to support all kinds of crane systems. Complete bridge crane, monorail crane, or jib crane systems can all be included with your CBC Steel Building package to meet any need. Commercial Industries can also just provide beams and rails for your existing crane system or have your CBC Steel Building designed with mounting corbels only to accommodate your complete existing crane system. Only the highest quality components are used to create a crane system that will perform the way it is intended, saving you money in maintenance and downtime.